 |
| The updated Edgebot shield |
I made a small update to the modular Edgebot shield schematic, all that was involved was the re-placing of one of the stackable headers from a 6-pin to an 8-pin header, along with this, a few components required re-naming.
As for the PCB board side of the development, little changed as the stackable header had to be replaced and therefore a few local components had to re-located or moved slightly. Minor changed to the silkscreens were made to make the pin-outs easier to understand. There was also a minor amount of track rework to remove the two vias on the PCB.
The latest Edgebot shield (v0.7) can be downloaded from Dropbox.
No comments:
Post a Comment